Se rendre au contenu

Aritech RF-9011-07-1 - Wireless repeater 433 MHz

https://www.mcdservices.be/web/image/product.template/354235/image_1920?unique=f68eb1f

Répéteur sans fil 433 MHz - Prise en charge 433 MHz 63 bits ou 433 MHz LoNa sélectionnable - Taille compacte et design moderne - Pas d'antennes externes - Visualisation du capteur RSSI, Niveau de bruit et batterie - Tamper ouverture et arrachement - INCERT N° : C-001-1510/A

282,15 € 282.15 EUR 282,15 €

282,15 €

Not Available For Sale

  • Couleur
  • Marque
  • Environnement

Cette combinaison n'existe pas.

Couleur: Blanc
Marque: Aritech
Environnement: Intérieur

Conditions générales
Garantie satisfait ou remboursé de 30 jours
Expédition : 2-3 jours ouvrables

General

The wireless repeater receives and retransmits signals from 433 MHz Learn Mode sensors to increase the distance a wireless sensor can be mounted away from the control panel or wireless receiver and is therefore ideal for installations where wireless sensors are either beyond panel reception or cannot pass the sensor test.

In smart mode, up to 4 repeaters can be cascaded to further increase the wireless coverage of the wireless security system. Up to 16 repeaters can be used in one system.

Installation

The wireless repeater has a tamper protection for opening the enclosure as well as for removing the unit from the wall. Its compact design and the fact there are no visible antenna's makes it suitable to be installed in any interior.

The repeater is powered from the mains and includes a rechargeable lithium-ion backup battery.

Diagnostics

On the wireless repeater, a number of color LEDs indicate the radio strength signal (RSSI) allowing identifying the best location inside the premise where to install the wireless sensors. Other than the RSSI value, the LEDs can also visualize the noise floor level and the battery level of the backup battery which is included.

Key features:

  • 433 MHz 63 bit or 433 MHz LoNa support selectable
  • Compact size and modern design
  • No external antennas
  • Visualization of sensor RSSI, Noise Floor Level, Battery level
  • Cover and pry-off tamper
  • -8dB test function
  • Lithium-ion rechargeable backup battery included
  • Reports AC failure, low battery, tamper, RF supervisory, RF jamming
  • EN50131 Grade 2, INCERT Grade 2

Technical specifications:

General
Expander typeDatabus isolator / repeater
CompatibilitéSmart Mode : xGenConnect, Advisor Advanced Dumb Mode : ZeroWire
Wireless
Operating frequency433 MHz
Supported wireless devices433 MHz 63 bit sensors & keyfobs 433 MHz LoNa sensors and repeaters
Maximum number of sensors64 or max number supported by panel
Maximum number of repeaters in daisy chain4
Maximum number of repeaters in one system16
Maximum power output10 dBm
Backup
Battery type3.6 V ; 3200 mAh lithium ; Li-ion battery (included)<br>Samsung INR18650-35E ; Panasonic NCR18650B
Electrical
Operating voltage100 to 230 VAC
Current consumptionmin. 11 mA<br>max 24.2 mA
Physical
Physical dimensions102 x 102 x 33 mm
Net weight220 g
ColourWhite
MaterialABS plastic
Environmental
Operating temperature0 to +40°C
Relative humidity80% noncondensing
EnvironnementIndoor
Regulatory
CertificationEN50131 Grade 2, INCERT

Documentation : Fiche technique (FR) · Notice d'installation (FR) · Fiche technique (EN)