Se rendre au contenu
  1. Tous les produits
  2. Tous les produits
  3. IFS POE302-EX - High Power PoE and Gigabit Ethernet Data Extender
-

IFS POE302-EX - High Power PoE and Gigabit Ethernet Data Extender

https://www.mcdservices.be/web/image/product.template/1638527/image_1920?unique=6156df3

195,12 € 195.12 EUR 195,12 €

195,12 €

Not Available For Sale

  • Marque
  • Environnement

Cette combinaison n'existe pas.

Contactez-nous
Marque: IFS
Environnement: Intérieur

Conditions générales
Garantie satisfait ou remboursé de 30 jours
Expédition : 2-3 jours ouvrables

Partager

Overview

The IFS Power over Ethernet Extender is a quick and easy solution that can be used when a Powered Device (PD) needs to be installed beyond the 100 meter (328 ft.) distance limitation of Ethernet. The module can be powered from any network switch with PoE IEE802.3at or from an IFS POE302-MS Mid-Span Power Injector. This module provides the ability to extend Ethernet data and PoE power on a single network cable for remote deployment of an Ethernet powered device (PD) i.e. IP camera, access control panel, VoIP or wireless access point (WAP). The IFS POE302-EX is powered via the PoE power provided by a PoE switch or injector and thus does not require an external power adapter. Each extender requires just 3 watts of PoE power providing the remaining power to the next extender or PD device. Up to three POE302-EX extenders can be daisy-chained at 328 ft. (100m) intervals, based on the EIA-568 standard, to extend Ethernet data and PoE power up to 984 ft. (300m). Maximum distance (or hops) is dependent upon the remaining PoE power available to meet the PD power requirements. The POE302-EX facilitates easier network planning by eliminating restrictions of edge device placement near AC power outlets and reducing the need for AC wiring and installation costs while delivering higher reliability. This results in a cost-effective remote power and data distribution cable management solution for a PoE-centric IP network.

Key features:

  • Plug-and-play PoE+ self-powered design
  • Can be used with an IFS PoE Injector or other IEEE 802.3at compliant PSE equipment
  • Supports 10/100/1000Base-TX Ethernet
  • Auto-detect of PoE equipment providing protection from incorrect installation
  • Current overload detection
  • LED Indicators for PoE In, PoE Out, Data
  • Can be daisy-chained to extend data and PoE on a single network cable a maximum of 300m.

Technical specifications:

General
CategoryPoE Extender
Port typeCopper (RJ45)
Port speedGigabit
Physical
Physical dimensions94 x 70 x 26 mm
Net weight197 g
MaterialMetal
Environmental
Operating temperature0 to +50°C
Storage temperature-40 to +85°C
Relative humidity5 to 90% noncondensing
EnvironnementIndoor
MTBF>50,000 hrs. @ 25°C
Ethernet
Data Rate10/100/1000Mbps
Max Throughput (packet per second)1488000 pps@64Bytes
IEEE StandardsIEEE 802.3 Ethernet / IEEE 802.3u Fast Ethernet / IEEE 802.3ab Gigabit Ethernet
Latency1765 ns (@ 64 Byte Frame)
Maximum Frame Size9 Kbytes
EIA/TIA-568 StandardsCategory 5/5e cable
Power Over Ethernet (PoE)
PoE StandardIEEE 802.3at High Power over Ethernet PSE / Mid-Span / IEEE 802.2at High Power over Ethernet PD / Mid-Span
PoE Power Supply TypeMid-Span / Type B (No external power adapter required)
PoE Output Pin Assignment4/5(+), 7/8(-)
PoE Output Power with Multiple Extenders52 VDC, 510 mA, max. 26 W
Connectors & Indicators
Ethernet + PoE In1 x RJ-45 connector
Ethernet + PoE Out1 x RJ-45 connector
LED Indicator1 PoE In, 1 PoE Out , 1 Data LNK/ACT
Electrical & Mechanical
Input PowerPowered by 56 VDC from PoE Switch or Mid-Span Injector @ IEEE 802.3at
PoE Output Power52 VDC @ 510 mA, 26 W
Maximum Powered Devices1
Power consumption3 W from PoE uplink
Standards Compliance
RegulatoryFCC Part 15 Class A, CE
EMIEN 55022 CLASS A / EN61000-3-2 / EN61000-3-3
EMSEN 55024 / IEC 61000-4-2 / IEC 61000-4-3 / IEC 61000-4-4 / IEC 61000-4-5 / IEC 61000-4-6 / IEC 61000-4-8 / IEC 61000-4-11 / IEC/EN 60950-1

Documentation : Fiche technique (FR) · Fiche technique (EN)