Skip to Content

Ziton 177601 - ZP755HA-2R omni sounder, red

https://www.mcdservices.be/web/image/product.template/1637643/image_1920?unique=38c3257

173,94 € 173.94 EUR 173,94 €

173,94 €

Not Available For Sale

  • Couleur
  • Marque
  • Indice IP
  • Environnement
  • Type de signalisation

This combination does not exist.

Couleur: Rouge
Marque: Ziton
Indice IP: IP21
Environnement: Intérieur
Type de signalisation: Sirène

Termos e Condições
30-day money-back guarantee
Shipping: 2-3 Business Days

General

ZP755HA-2R is a RED addressable horn sounder designed for use with ZP addressable fire alarm systems. Designed with dual front and rear sound paths, it provides an 'all around' sound output - ideal for open area coverage. Installed directly onto and powered by the ZP wiring loop, the ZP755HA-2 sounders enable the system designer to offer a complete ZP addressable system on a single pair of wires. Installation time and costs are further reduced as the moulding plugs directly into a first fix base – eliminating the need for any internal connections. The units high efficiency acoustic design, together with a low energy 'sound gun' transducer, enables up to 40 sounders to be connected to a one kilometre loop of 1.5 mm² cable, with a wiring run of 50 metres to the first device.

Self test facility

The range features a unique self test facility - automatically activated during routine sounder testing. A built in microphone circuit measures sound output and automatically signals the sounder address and location to the control panel, should the output test fail. In systems where loop lengths or current requirements are excessive, ZP755 sounders can be powered directly from an external power supply. All ZP755 sounders incorporate switch settings enabling them to be assigned a unique address, which is polled by the panel every two seconds.

Range of sound outputs

Continuous, intermittent and two-tone outputs are available from which any combination can be chosen to provide alert and evacuate, two stage alarms. Sound types comply with most international codes (e.g. BS 5839 Part 1 recommended frequencies). ZP755HA-2 sounders produce a sound output of up to 92 dBA (tested at 1 metre). The volume setting can be reduced for areas where a lower sound output is required. Moulded in high impact thermoplastic, the sounders are available in either polar white, red or white.

Key features:

  • Wide 'all around' sound distribution
  • Microphone self test facility
  • Plug in base – no direct wiring connections
  • Up to 50 sounders directly on the loop wiring
  • High efficiency sound gun transducer
  • Synchronised outputs
  • EN54:3 approved and CPR certified

Technical specifications:

General
CompatibilityZP7 series addressable systems
Addressing methodDIP Switches
MonitoringDevice removal, Device type, Open circuit, Short circuit, Sound output
Electrical
Operating voltage19.5 to 20.5 V (from the loop)<br>18 to 30 VDC (from an external supply)
Sounder
Output level<90 dB(A) (tone dependant)
Selectable tonesUser configurable
Physical
Physical dimensions127 x 113 mm (Ø x H)
Net weight275 g
ColourRed
Mounting typeBase mount
Mounting positionCeiling, Wall
MaterialMoulded thermoplastic
Environmental
Operating temperature-10 to +60°C
Storage temperature-20 to +70°C
Relative humidity10 to 95% noncondensing
EnvironmentIndoor
IP ratingIP21C
Regulatory
CompliancyCE, REACH, RoHS 3, WEEE
CertificationCPR
StandardsEN54-3
Loop current
Quiescent (when loop powered)820µA
Active (when loop powered)6.4mA
Quiescent (when externally powered)470µA
Active (when externally powered)500µA
Devices per loop (max)
50 (1km loop of 1.5mm² cable, 50 m to first device)
Wiring
2 core loop
Addressing method
7 way dipswitch

Documentation: Fiche technique (FR) · Fiche technique (EN) · Notice d'installation (EN)